Previous Next

Timing Belt Covers

REMOVAL & INSTALLATION

1,998cc Engine

Fig. 1: Exploded view of the front timing components on the 1,998cc engine

  1. Disconnect the battery ground.
  2. Remove the distributor.
  3. Remove the fan and radiator shroud.
  4. Remove the alternator.
  5. Disconnect the air injection pipes.
  6. Remove the fan pulley, hub and bracket.
  7. If so equipped, remove the air conditioning compressor drive belt.
  8. If so equipped, remove the power steering pump drive belt.
  9. Remove the crankshaft pulley and baffle plate.
  10. Remove the upper, then the lower, belt covers. To install:
  11. Install the upper, then the lower, belt covers.
  12. Install the crankshaft pulley and baffle plate.
  13. Install the power steering pump drive belt.
  14. Install the air conditioning compressor drive belt.
  15. Install the fan pulley, hub and bracket.
  16. Connect the air injection pipes.
  17. Install the alternator.
  18. Install the fan and radiator shroud.
  19. Install the distributor.
  20. Connect the battery ground.

Previous Next