Replace the spark plug wires one at a time when installing a new set so there will be no mixup. The longest cable should be replaced first. Make sure that the boot is installed firmly over the spark plug. The wire routing should be exactly the same as the original. Insert the nipple into the tower on the distributor cap and/or coil. Repeat the process for each wire.
| Fig. 1: Remove plug wires by grasping its boot, not the
wire, and, while twisting slightly, pull straight upwards
|
The Millenia S uses a 2.3L Miller-cycle supercharged engine which utilizes individual coils for each spark plug. There are no plug wires to inspect or change.
