Several precautions must be observed with alternator equipped vehicles to avoid
damage to the unit.
- If the battery is removed for any reason, make sure it is reconnected with
the correct polarity. Reversing the battery connections may result in damage
to the one-way rectifiers.
- When utilizing a booster battery as a starting aid, always connect the positive
to positive terminals and the negative terminal from the booster battery to
a good engine ground on the vehicle being started.
- Never use a fast charger as a booster to start vehicles.
- Disconnect the battery cables when charging the battery with a fast charger.
- Never attempt to polarize the alternator.
- Do not use test lights of more than 12 volts when checking diode continuity.
- Do not short across or ground any of the alternator terminals.
- The polarity of the battery, alternator and regulator must be matched and
considered before making any electrical connections within the system.
- Never separate the alternator on an open circuit. Make sure all connections
within the circuit are clean and tight.
- Disconnect the battery ground terminal when performing any service on electrical
components.
- Disconnect the battery if arc welding is to be done on the vehicle.
