INSTALLATION

2.5L Engine

1. Install or connect the following:
   • Alternator. Tighten the bolts to 29–41 ft. lbs. (40–50 Nm).
   • Center shaft support bracket. Tighten the bolts to 32–45 ft. lbs. (43–61 Nm).
   • Alternator harness connectors. Tighten the battery terminal nut to 87–130 inch lbs. (10–15 Nm).
   • Right axle halfshaft and center shaft assembly
   • Exhaust front pipe
   • Subframe transverse section. Tighten the bolts to 69–96 ft. lbs. (94–131 Nm).
   • Accessory drive belt
   • Negative battery cable

3.0L Engine

1. Install or connect the following:
   • Alternator
   • Alternator harness connectors. Tighten the battery terminal nut to 44–60 inch lbs. (5–7 Nm).
   • Power steering pulley. Tighten the nut to 29–43 ft. lbs. (40–58 Nm).
   • Accessory drive belts. Tighten the alternator lockbolt to 14–18 ft. lbs. (19–25 Nm) and the pivot bolt to 28–38 ft. lbs. (38–51 Nm).
   • Negative battery cable