Refer to the Timing Chain, Sprockets, Front Cover and Seal procedure in this
section.
- Before servicing the vehicle, refer to the precautions in the beginning
of this section.
- Remove or disconnect the following:
- Negative battery cable
- Accessory drive belts
- Crankshaft pulley
- Front cover
- Timing belt. Refer to the Timing Belt unit repair section.
- Crankshaft timing sprocket
- Front crankshaft seal
To install:
- Install or connect the following:
- Front crankshaft seal flush with the oil pump housing
- Crankshaft timing sprocket
- Timing belt
- Front cover
- Crankshaft pulley. Tighten the bolt to 116–122 ft. lbs. (157–166
Nm).
- Accessory drive belts
- Negative battery cable
- Start the engine and check for leaks.
