- Before servicing the vehicle, refer to the precautions in the beginning
of this section.
- Remove the wheel and remove the brake drum.
- Disconnect the parking brake cable from the backside of the brake backing
plate.
- Remove the upper return spring.
- From the lower (leading side) brake shoe, remove the hold pin and the spring.
- Remove the lower (leading side) brake shoe and lower return spring and the
anti-rattle spring.
- Remove the upper (trailing side) brake shoe hold pin and spring and remove
the upper brake shoe.
To install:
- Install the upper (trailing side) brake shoe to the operating lever and
then to the wheel cylinder and backing plate. Install the brake shoe hold
spring and hold pin.
- Install the anti-rattle spring.
- Install the lower return spring to both brake shoes.
- Install the leading side brake shoe to the operating lever and then to the
wheel cylinder and anchor plate.
- Install the hold spring and hold pin to the leading side brake shoe.
- Install the upper return spring.
- Install the brake drum.
- Install the wheels.