To Remove:
WARNING
Windshield washer fluid contains a poisonous substance called methanol. Failure to observe all warnings on the washer fluid container’s label can result in serious personal injury.
NOTE: Drain the windshield washer reservoir before removing it to prevent spillage.
- Disconnect the windshield washer hose from the windshield washer pump.
- Disconnect the coolant overflow hose from the engine coolant overflow reservoir and plug the outlet port of the reservoir.
- Disconnect the electrical connector for the windshield washer reservoir pump.
- Move the air filter housing to the side.
- Remove the screws and nuts then remove the windshield washer reservoir.
CAUTION
Make sure not to damage the rubber grommet when you remove the washer pump from the washer reservoir.
- Remove the washer pump from the washer reservoir.
To Install:
NOTE: The windshield washer reservoir and washer pump get serviced independently.
- Install the washer pump into the washer reservoir. Be careful not to damage the rubber grommet.
- Install the windshield washer reservoir, screws, and nuts. Torque to 44-53 in-lb (5-6 Nm).
- Move the air filter housing back to its original position.
- Connect the electrical connector for the windshield washer reservoir pump.
- Connect the coolant overflow hose to the engine coolant overflow reservoir.
- Connect the windshield washer hose to the windshield washer pump.
