Shift Lever and Boot

Removal & Installation

To Remove:

1. Remove the 2 screws that fasten the console to the floor.
2. Lift the outer gearshift lever boot and console assembly to get access to the nut and eccentric stud that attaches the upper gearshift lever to the lower gearshift lever.
3. Remove the nut.
4. Install the nut on the left side of the lever, then tighten the nut to remove the eccentric stud from the gearshift lever.
5. As an assembly, remove the upper gearshift lever, outer gearshift lever boot, and console assembly.

   CAUTION
   Make note of the position of the vehicle identification tags on top of the inner gearshift lever boot for correct installation.

6. Remove the 4 screws and the inner gearshift lever boot, if necessary.

To Install:

1. If necessary, install the inner gearshift lever boot and 4 screws.

   CAUTION
   Make note of the position of the vehicle identification tags on top of the inner gearshift lever boot for correct installation.

2. As an assembly, install the upper gearshift lever, outer gearshift lever boot, and console assembly.
3. Install the eccentric stud onto the gearshift lever using the nut.
4. Install the 2 screws that fasten the console to the floor.