Oil Pump

Removal & Installation

To Remove:

1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
2. Drain the engine oil.
3. Remove the negative battery cable.
4. Remove the oil pan.
5. Remove the oil pump.
6. Clean and examine the sealing surfaces.

To Install:

1. Clean and examine all sealing surfaces.
2. Install the oil pump. Torque to 13 ft-lb (18 Nm).
3. Install the oil pan.
4. Install the negative battery cable.
5. Fill the engine with clean oil.
6. Start the vehicle and check for leaks. Repair if necessary.