- Before servicing the vehicle, refer to the precautions in the beginning
of this section.
- Remove or disconnect the following:
- Negative battery cable
- Front wheel
- Manual locking hub assembly from the rotor by pulling straight outward
- Plastic stub shaft retainer
- Front disc brake caliper from the anchor and move it aside. Support
the front suspension lower arm.
- Upper ball joint from the steering knuckle
- Outboard front driveshaft from the hub
- Halfshaft from the axle housing
- Driveshaft and joint from the axle housing
To install:
- Install or connect the following:
- Halfshaft and joint to the axle housing
- Outboard front driveshaft to the hub
- Upper ball joint to the steering knuckle
- Brake caliper to the anchor and remove the front suspension support
- New stub shaft retainer
- Locking hub to the brake rotor
- Front wheel
- Negative battery cable
