Blower Motor

Removal & Installation

To Remove:

1. Disconnect the speed control servo and the connector.
2. Remove the screw and reposition the speed control servo.
3. Disconnect the wire harness connector then remove the blower motor housing tube.
4. Remove the screws and blower motor.
5. Remove the retaining clip and blower motor wheel from the blower motor.

To Install:

1. Install the blower motor wheel into the blower motor and install retaining clip.
2. Install the blower motor and screws.
3. Install the blower motor housing tube then connect the wire harness connector.
4. Correctly position the speed control servo and install the screw.
5. Connect the connector to the speed control servo.