Battery

Removal & Installation

To Remove:

CAUTION
Make sure to connect the correct battery cables to the correct battery terminals. Reversing the battery's polarity may result in extensive damage to electrical components.

1. Turn the ignition switch to the OFF position.
2. Turn off all lighting and accessories.
3. Disconnect the negative battery cable first, and then the positive cable.
4. Remove the hardware securing the battery to the tray.
5. If equipped, remove the battery cover.
6. Remove the battery from the tray.

To Install:

1. Position the battery on the tray and install the cover if equipped.
2. Clean the battery terminals and cable ends with a wire brush.
3. Install the battery hold down bracket and fasteners. Do not make the fastener so tight as to damage the battery.
4. Connect the positive battery cable first and then the negative cable.