Camshaft Position (CMP) Sensor

Removal & Installation

To Remove:

1. Disconnect the negative battery cable.
2. Disconnect the vacuum hose from the intake manifold.
3. Disconnect the camshaft position (CMP) sensor electrical connector.
4. Remove the bolt and the CMP sensor.
5. Lubricate the O-ring with clean engine oil.

To Install:

1. Lubricate the O-ring with clean engine oil.
2. Install the CMP sensor and bolt.
• Torque to 62 in. lbs. (7 Nm).
3. Connect the CMP sensor electrical connector.
4. Connect the vacuum hose to the intake manifold.
5. Connect the negative battery cable.