CAUTION
Avoid scratching or damaging the oil seal surface or leakage can occur.
Using a sharp awl, punch one hole into the crankshaft rear oil seal metal surface between the seal lip and the cylinder block.
Screw the threaded end of the jet plug remover (310-005) into the oil seal. Use the jet plug remover to remove the crankshaft rear oil seal.
To Install:
Lubricate the outer lips and the inner seal on the crankshaft rear oil seal with clean engine oil.
Using the crankshaft rear main oil seal installer (303-323), install the crankshaft rear oil seal. Alternate bolt tightening to correctly seat the crankshaft rear oil seal.
