Powertrain Control Module (PCM)

Removal & Installation

CAUTION
The control module is sensitive to static discharge. Make sure to touch a nearby metal object to discharge any static electricity that may be built up on your body.

To Remove:

1. Disconnect the negative battery cable.
2. Remove the powertrain control module (PCM) electrical connector.
3. Remove the nuts and the PCM cover.
4. Remove the PCM.

To Install:

1. Install the PCM.
2. Install the PCM cover and nuts.
3. Install the PCM electrical connector.
   • Torque to 62 in. lbs. (7 Nm).
4. Connect the negative battery cable.