DRAIN AND REFILL

1. Remove the fill/check plug on the side of the transfer carrier, using a proper size socket or open end wrench.
2. Position a drain pan under the carrier and remove the drain plug, using a proper size socket or open end wrench. Drain the carrier, then reinstall the drain plug.

   Fig. 1: Transfer carrier fill/check plug — 323 with 4WD

   Fig. 2: Transfer carrier drain plug — 323 with 4WD

3. Add 0.53 qt. (0.50 liter) of the appropriate fluid through the fill/check opening, using a turkey baster or equivalent syringe type pump.
4. Reinstall the fill/check plug and remove the drain pan.