Check the lubricant in the steering gear every 15,000 miles (24,155 km).
- Remove the filler plug.
- The oil level should be up to the bottom of the fill hole.
- Add SAE 90 EP gear lubricant, as required.
- Replace the filler plug.
On 626 and MX-6 vehicles equipped with four wheel steering, check the rear
steering gear fluid level every 30,000 miles (48,310 km).
- Remove the bleeder valve on the rear steering gear housing.
Fig. 1: Check the rear steering gear oil level
with a piece of wire — 1988–89 626 and MX-6
with 4WS
|
- Insert a small piece of wire into the bleeder valve opening and check
the level. The fluid level (as indicated by the length of the double-arrow
line in the accompanying illustration) should be 1.6–1.8 in. (41–46mm).
The total capacity of the unit is 0.9–1.1 qt. (0.8–1.0 liter).
Add fluid as required.
- Install the bleeder valve.