WINDSHIELD WIPERS AND WASHERS

Windshield Wiper Blade

1. Cycle the arm and blade assembly to a position on the windshield where removal of the blade can be performed without difficulty. Turn the ignition OFF at the desired position.
2. If so equipped, depress the locking tab near the center of the blade, while sliding the blade off the pin of the arm.

   NOTE: Some vehicles' wiper blades may utilize a different type of release method. In most cases, however, the blade can be removed from the arm after tension on the pin is released.

   To install:

3. Push the blade assembly onto the pin so that the locking tab (or other device, if applicable) engages the pin. Be sure that the blade is securely attached to the wiper arm.
4. Turn the ignition ON and check the wipers for normal operation.

   Fig. 1: Depress the locking tab and disengage the wiper blade from the arm