CLUTCH

Adjustments

PEDAL HEIGHT

1. Remove the floor mat.
2. Loosen the locknut on the adjusting bolt, stopper bolt or clutch switch.
3. Turn the adjusting bolt until the clearance between the upper surface of the pedal pad and the firewall is within specification:
   • 1982–83 GLC: 7.28–7.68 in. (185–195mm)
   • 1984–85 GLC: 9.06–9.25 in. (230–235mm)
   • 1979–85 RX-7: 7.28–7.68 in. (185–195mm)
   • 1986–89 RX-7: 8.46–8.86 in. (215–225mm)
   • 1982–88 626: 8.46–8.66 in. (215–220mm)
   • 1988–89 626 and MX-6: 8.50–8.70 in. (216–221mm)
   • 1986–89 323 (cable type): 8.43–8.62 in. (214–219mm)
   • 1988–89 323 (hydraulic type): 9.02–9.21 in. (229–234mm)
   • 1988–89 929: 8.46–8.66 in. (215–220mm)
4. After adjustment, tighten the locknut.

   Fig. 1: Clutch pedal height adjustment — hydraulic type

   Fig. 2: Clutch pedal adjustment — cable type