DRUM BRAKES

1. Remove the bleeder screw cap from the wheel cylinder which is furthest from the master cylinder.

   NOTE: Keep the master cylinder reservoir at least ³⁄₄ full during the bleeding operation.

2. Install a vinyl tube over the bleeder screw. Submerge the other end of the clear vinyl tube in a jar half full of clean brake fluid.
3. Depress the brake pedal rapidly several times.
4. Keep the brake pedal depressed and open the bleeder valve. Close the valve without releasing the pedal.
5. Repeat this operation until bubbles cease to appear in the jar.
6. Remove the tube and install the cap on the bleeder valve.