ALIGNMENT

The hood is provided with to-and-fro, up-and-down or side-to-side adjustments.

To make the to-and-fro or side-to-side adjustments:

1. Loosen the hood attaching bolts and move the hood to the proper position, then tighten the attaching bolts.
2. Repeat the procedure if necessary.

   To make the up-and-down adjustment (at the rear of the hood):

3. Loosen the hood stop bolts.
4. Using a screwdriver, turn the hood stop screws clockwise to lower the hood and counterclockwise to raise the hood. Hood is at the proper height when it is flush with the fenders.
5. Tighten the hood stop bolts.
6. Repeat the procedure if necessary.