Console

REMOVAL & INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the shift lever knob.
3. Unfasten and remove the parking brake lever covers.
4. Remove the rear seat ashtray.
5. Unfasten and remove the rear console.
6. Unfasten and remove the front console.
7. Installation is the reverse of the removal procedure.

   Fig. 1: Lift out the rear seat ashtray to access a retaining screw

   Fig. 2: Unfasten the rear console from the floor

   Fig. 3: After removing the screws which fasten the two consoles together, lift the rear console up and slide it over the parking brake lever