Door Panels

REMOVAL & INSTALLATION

1. Remove the window regulator handle, on non-power window equipped vehicles.
2. Remove the arm rest as required.
3. Remove the door lock knob.
4. Remove the inner door handle cover.
5. Using a flat screwdriver with the blade wrapped in tape, gently separate the door trim panel clips from the door.
6. Remove the door trim panel.
7. Place the door trim panel into position on the door.
8. Apply pressure to the trim panel in the areas where the trim panel clips attach to the door.
9. Install the inner door handle cover, door lock knob and the arm rest.

   Fig. 1: Common door panel fastener locations