Remove the single screw from the center of the radiator.
Open the tabs of the three radiator fasteners using a small flat blade screwdriver
and remove the radiator grille.
To install, position the grille and align the fastener holes with the holes
in the body. Once they are aligned, press the fasteners into place and install
the center installation screw.
Using the tip of a small flat bladed screwdriver, open the tabs of the fasteners
and remove the radiator grille. The number of fasteners will vary depending
on the model year.
To install, position the grille and align the fastener holes with the holes
in the body. Once they are aligned, press the fasteners into place.
Fig. 1: Releasing the grille tab fasteners on 626
and MX-6
