Engine

OIL LEVEL CHECK

Check the engine oil level every time you fill the gas tank. The oil level should be above the ADD or L (LOW) mark and not above the FULL or F mark on the dipstick. Make sure that the dipstick is inserted into the crankcase as far as possible and that the vehicle is resting on level ground. Also, allow a few minutes after turning off the engine for the oil to drain into the pan or an inaccurate reading will result.

1. Open the hood and remove the engine oil dipstick.

   Fig. 1: The oil level dipstick is located on the right side of the engine — MPV

2. Wipe the dipstick with a clean, lint–free rag and reinsert it. Be sure to insert it all the way.
3. Pull out the dipstick and note the oil level. It should be between the FULL or F mark and the ADD or L (LOW) mark.

   Fig. 2: Oil level dipstick measurement

4. If the level is below the lower mark, install the dipstick and add fresh oil to bring the level within the proper range. Do not overfill.

   Fig. 3: Pour the engine oil, using a funnel, through the oil fill hole located on the right side valve cover — MPV

5. Recheck the oil level and close the hood.

   NOTE: Use a multi–grade oil with API classification SG or better.