MPV MODELS

2.6L Engine

1. Start the engine.
2. Remove the circuit opening relay connector from the relay box, located in the right side of the engine compartment.
3. After the engine stalls, turn the ignition switch OFF and reinstall the relay connector.

   Fig. 1: Circuit opening relay connector location

3.0L Engine

CAUTION
Fuel injection systems remain under pressure after the engine has been turned OFF. Properly relieve fuel pressure before disconnecting any fuel lines. Failure to do so may result in fire or personal injury.

CAUTION
Do not allow fuel spray or fuel vapors to come in contact with a spark or open flame. Keep a dry chemical fire extinguisher nearby. Never store fuel in an open container due to risk of fire or explosion.

1. Start the engine.
2. Disconnect the fuel pump relay connector, located at the ECM.
3. After the engine stalls, turn the ignition switch OFF.
4. Connect the fuel pump relay connector.

   Fig. 2: Fuel pump connector location