Park the vehicle on level ground, so it is perpendicular to and, facing
a flat wall about 25 ft. (7.6m) away.
Remove any stone shields, if equipped, and switch ON the lights.
Loosen the mounting hardware of the lights so you can aim them as follows:
The horizontal distance between the light beams on the wall should
be the same as between the lights themselves.
The vertical height of the light beams above the ground should be
4 in. (10cm) less than the distance between the ground and the center
of the lamp lenses for fog lights. For driving lights, the vertical
height should be even with the distance between the ground and the center
of the lamp.
Tighten the mounting hardware.
Test to make sure the lights work correctly, and the light pattern is
even.
