REMOVAL & INSTALLATION

1. Disconnect the negative battery cable.
2. Disconnect the connector at the switch by flexing the retaining tab on the switch housing and withdraw the connector.
3. Rotate the switch ¹⁄₂ turn to expose the plastic retainer.
4. Push the tabs together to allow the retainer to slide rearward and separate from the switch.
5. Remove the switch from the pushrod.

   Fig. 1: View of the 3-function clutch interlock (or CPP) switch

   To install:

6. Fit the switch to the master cylinder pushrod.
7. Install the plastic retainer.
8. Rotate the switch into the position to attach the clip. Reconnect the switch connector.
9. Reconnect the negative battery cable.