Previous Next

Chassis and Cab Mount Bushings

REMOVAL & INSTALLATION

Navajo and B Series Pick-up Models Only

Fig. 1: Body-to-frame mounts and hardware — B Series Pick-up

Fig. 2: Body-to-frame mounts and hardware — B Series Pick-up Cab Plus

Fig. 3: Body-to-frame mounts and hardware — Navajo

Use the accompanying illustrations as a guide

  1. Remove interior trim as required.
  2. Back out the body mount bolt four or five turns.
  3. If necessary, have an assistant hold the lower retainer with a wrench.

    Fig. 4: When removing the body mount bolt, an assistant may need to hold the lower retainer from turning

  4. Strick the head of the bolt with a hammer to drive out the lower retainer.
  5. Remove the bolt and lower retainer.
  6. Use a jack and a block of wood and jack the body up enough to remove the old mount from between the frame and body.

    NOTE: Some of the other body mounts may need to be loosened in order to lift the body enough to remove the mount.

  7. Installation is the reverse of the removal procedure.

Previous Next