Previous Next

Grille

REMOVAL & INSTALLATION

Navajo

Fig. 1: Exploded view of the Navajo grille assembly

  1. Remove the plastic retainers securing the grille to the air deflector.
  2. Remove the screws attaching the grille to the reinforcement panel.
  3. Using a small prying tool, depress the spring tabs at the lower outboard openings and disengage the grille from the headlamp housings.
  4. Remove the grille from the vehicle.
  5. Installation is the reverse of removal.
B Series Pick-up
1994–97

Fig. 2: Exploded view of the 1994–97 B Series Pick-up grille assembly

  1. Remove the radiator grille assembly retaining bolts.
  2. Lift up the radiator grille slightly, then tilt the top forward.
  3. Remove the grille from the vehicle.
  4. Installation is the reverse of removal.
1998

Fig. 3: Radiator on the 1998 B Series Pick-up

  1. Remove the four mounting screws along the top of the radiator grille.
  2. Unclip the lower portion of the radiator grille assembly.
  3. Remove the grille from the vehicle.
  4. Installation is the reverse of removal.
MPV
1994–95

Fig. 4: 1994–95 MPV grille components

The grille is in 3 pieces: 1 center piece and 2 side pieces. To remove any or all of these, remove the screws and disengage the retaining clips. To disengage the retaining clips, depress the tabs of the clip with a small screwdriver.

To install the clips, simply press them into place.

1996–98

Fig. 5: 1996–98 MPV grille assembly

The radiator grille on all 1996–98 MPV models is a one piece assembly secured in place by plastic retaining clips.

  1. Disengage the plastic retaining clips.
  2. Remove the grille assembly from the vehicle.
  3. Installation is the reverse of removal.

Previous Next